|
|
Cost saving
- Get the whole machine right - good Condition Monitoring practice.
- Better assessment - better maintenance/overhaul decisions.
- Tighter Tolerances - longer periods between maintenance.
- Tighter Tolerances - production efficiency gains. Top
|
|
Accurate 3D information
- The greatest advantage of 3D Coordinate Measurement Systems
over traditional mechanical methods and optical tooling techniques of traditional
surveying is the flexibility gained by being able to measure and then analyse
a complete machine and/or component in 3D.
- Geometric forms such as cylinders, circles, planes and lines
are applied to the data to determine sizes, shapes and alignment. This means
that eccentricities, ovality, bad clearances and runout can be determined
and predicted from the data. Top
|
 |
No physical references
- It is not necessary to physically reproduce any geometric form
such as a surface or centre line with a piano wire or by placing an instrument
on that feature. Top
|
|
Significantly higher accuracy and reliability
- Significantly higher accuracies are achievable with reliability
and the ability to measure and obtain results faster. With the laser tracker
3D point accuracy of 0.005mm/m is achieved. Results are provided correct
at the standard reference temperature of 20°C or at any other required value. Top
|
|
Fast and flexible measurement
- Mobile instrumentation enables on site measurement of components.
When appropriate, ADS can readily complement its modern optical technology
with traditional mechanical methods and work closely with other contractors
where necessary. Top
|
|
|
|
Precision dimensional measurement service to industry